HISL - Position Sensors
The areas of use for position sensors are becoming increasingly diverse and range from automation technology to energy supply, right through to the aerospace industry. The best measurement results are achieved in combination with the specially developed Industrial Components magnet.
Its magnetic field is recorded by the sensor and outputted in a linear voltage signal according to its longitudinal movement.
Order Sample
Account Manager Sensor Systems
Wear-free, programmable, magnetic Hall sensors for length measurement. A magnetic field generated by a permanent magnet is outputted according to a longditudinal motion in a linear output voltage. Available with connecting cable with or without M8 connector.
Highlights
- High tolerance for misalignment
- Max. air gap of 5.2 mm
- Customer-specific programming possible
- Detection possible on front and longitudinal side
- Sensor can be mounted in normal and supine position
Application Examples
- Position detection in working machines
- Length measuring system for lengths up to 40 mm
- Position monitoring short-stroke cylinders
- Position measurement chain tensioners
Properties
- Contact-less and wear-free travel/position sensors for various industrial applications
- Variants with different detection sides available which offers a wide range of installation possibilities
- Extremely robust design for the harshest environments
- Brass screw-on bushings on magnet and sensor – for durable bolted connections
- Sheathed cable for critical assembly areas
- Variants for voltage ranges from 5 V to 36 V are available
- High tolerances against alignment errors
- EMC/ESD protected
- Measurement is possible through non-magnetic walls
- Customised designs upon request (e.g. connector, magnets, programming etc.)
Technical Data
| Measuring Range | 40 mm |
| Connection Interface | M8x1 connector or open cable end |
| Maximum Air Gap | 5.2 mm |
Maximum Offset Magnet to Sensor | 2.0 mm |
| Protection Class | IP6K9K |
| Operating Temperature | -40°C to +125°C |
| Cable Length | 200 mm or 1.000 mm |
| Supply Voltage | 4.5 V to 5.5 V or 9 V to 36 V |
| Electrical Features | 5 V Variants | 36 V Variants |
Min. Operating Voltage | 4.5 V | 9 V |
| Max. Operating Voltage < +85°C | 5.5 V | 36 V |
| Max. Operating Voltage < +125°C | 5.5 V | 25 V |
| Output Signal | ratiometric, analog voltage signal | ratiometric, analog voltage signal |
| Min. Output Signal | 10kΩ load resistor (PULL-Down) 10% VDD | 10kΩ load resistor (PULL-Down) 0.5 V |
| Max. Output Signal | 10kΩ load resistor (PULL-Down) 90% VDD | 10kΩ load resistor (PULL-Down) 4.5 V |
| Max. Signal Deviation | Measuring Range 40 mm/mech. positioning accuracy ±0.1 mm/HIS-magnet/-40°C ... +85°C ± 2% VDD | Measuring Range 40 mm/mech. positioning accuracy ±0.1 mm/HIS-magnet/-40°C ... +85°C ± 2.5 % 5 V |
| Fullfilled EMC Standards | EN13309:2010 | EN13309:2010 EN60947-5-2:2007 |
Mechanical Characteristics: Sensor
| Cable Length with M8 Connector | 200 or 1.000 mm |
Cable Length without M8 Connector | 1.022,9 or 3.022,9 mm |
| Type of Connector | M8x1 |
| Housing Material | PA-6 GF30 |
| Cable Jacket Material | TPE, PUR |
| Protection Class with M8 Connector | IP66, IP67, IPx9k |
Protection Class without M8 Connector | IP66, IPx9k |
| Vibration Resistance | DIN EN 60947-5-2 |
| Min. Ambient Temperature | -40°C |
| Max. Ambient Temperature | +125°C |
Mechanical Characteristics: Magnet
| Housing Material | PA-66 GF25 |
| Magnet Material | N42SH |
| Min. Ambient Temperature | -40°C |
| Max. Ambient Temperature | +125°C |
No direct impact on the magnet is allowed.
On request custom connectors, output signal programming, shielding and custom magnet designs are possible.
| Article Number | Magnet Orientation | Detection Side | Cable End |
| HISL-3115-V11-W02-CM8-00 | parallel to mounting axis | face side | with connector 200 mm |
| HISL-3115-V11-W10-CM8-00 | parallel to mounting axis | face side | with connector 1.000 mm |
| HISL-3115-V11-W30-001-00 | parallel to mounting axis | face side | without 3.022,9 mm |
| HISL-3115-V11-W10-001-00 | parallel to mounting axis | face side | without 1.022,9 mm |
| HISL-3115-V12-W02-CM8-00 | parallel to mounting axis | face side | with connector 200 mm |
| HISL-3115-V12-W10-CM8-00 | parallel to mounting axis | face side | with connector 1.000 mm |
| HISL-3115-V12-W30-001-00 | parallel to mounting axis | face side | without 3.022,9 mm |
| HISL-3115-V12-W10-001-00 | parallel to mounting axis | face side | without 1.022,9 mm |
| Article Number | Magnet Orientation | Detection Side | Cable End |
| HISL-3125-V11-W02-CM8-00 | transversely to mounting axis | face side | with connector 200 mm |
| HISL-3125-V11-W10-CM8-00 | transversely to mounting axis | face side | with connector 1.000 mm |
| HISL-3125-V11-W30-001-00 | transversely to mounting axis | face side | without 3.022,9 mm |
| HISL-3125-V11-W10-001-00 | transversely to mounting axis | face side | without 1.022,9 mm |
| HISL-3125-V12-W02-CM8-00 | transversely to mounting axis | face side | with connector 200 mm |
| HISL-3125-V12-W10-CM8-00 | transversely to mounting axis | face side | with connector 1.000 mm |
| HISL-3125-V12-W30-001-00 | transversely to mounting axis | face side | without 3.022,9 mm |
| HISL-3125-V12-W10-001-00 | transversely to mounting axis | face side | without 1.022,9 mm |
| Article Number | Magnet Orientation | Detection Side | Cable End |
| HISL-3215-V11-W02-CM8-00 | parallel to mounting axis | length side | with connector 200 mm |
| HISL-3215-V11-W10-CM8-00 | parallel to mounting axis | length side | with connector 1.000 mm |
| HISL-3215-V11-W30-001-00 | parallel to mounting axis | length side | without 3.022,9 mm |
| HISL-3215-V11-W10-001-00 | parallel to mounting axis | length side | without 1.022,9 mm |
| HISL-3215-V12-W02-CM8-00 | parallel to mounting axis | length side | with connector 200 mm |
| HISL-3215-V12-W10-CM8-00 | parallel to mounting axis | length side | with connector 1.000 mm |
| HISL-3215-V12-W30-001-00 | parallel to mounting axis | length side | without 3.022,9 mm |
| HISL-3215-V12-W10-001-00 | parallel to mounting axis | length side | without 1.022,9 mm |
| Article Number | Magnet Orientation | Detection Side | Cable End |
| HISL-3225-V11-W02-CM8-00 | parallel to mounting axis | length side | with connector 200 mm |
| HISL-3225-V11-W10-CM8-00 | parallel to mounting axis | length side | with connector 1.000 mm |
| HISL-3225-V11-W30-001-00 | parallel to mounting axis | length side | without 3.022,9 mm |
| HISL-3225-V11-W10-001-00 | parallel to mounting axis | length side | without 1.022,9 mm |
| HISL-3225-V12-W02-CM8-00 | parallel to mounting axis | length side | with connector 200 mm |
| HISL-3225-V12-W10-CM8-00 | parallel to mounting axis | length side | with connector 1.000 mm |
| HISL-3225-V12-W30-001-00 | parallel to mounting axis | length side | without 3.022,9 mm |
| HISL-3225-V12-W10-001-00 | parallel to mounting axis | length side | without 1.022,9 mm |
